Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
DataLogger IoT
with onboard 9DoF
This ESP32-based data logger automatically record inputs from a large selection of Qwiic sensors without writing a single line of code.
Jump to Subcategory:
added to your cart!
This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identif…
This is the 6mm CS-mount wide angle lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module.
This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small…
The MicroMod Machine Learning Carrier combines the freedom to explore any processor in the MicroMod lineup without the need f…
The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1015 Air Velocity S…
This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pi…
The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis.
The US1881 is an integrated Hall-Effect latched sensor.
This simple device operates at 940nm and works well for generic IR systems.
The FLIR Lepton Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the Lepton camera m…
The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer.
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g…
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
Powered by Raspberry Pi's RP2040 microcontroller, this board has the power to run all Tensorflow Lite Micro tiny machine lear…
The STMicroelectronics ST25DV _**dynamic**_ Near Frequency Communication / Radio Frequency Identification tag ICs are awesome…
These paper-thin, adhesive EPCglobal Gen2 tags work with our RFID readers and can be stuck to practically anything.
A line follower sensor gives your robot the ability to detect lines or nearby objects.
Experience sharp, smooth video calling (720p/30FPS) in a widescreen format with the C270 HD Webcam.
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low cond…
The SparkFun Notecarrier Cellular Function Board adds a cellular modem to the MicroMod ecosystem using the Notecard - NOTE-NB…
The Build HAT allows you to control LEGO® Technic™ devices with your favorite Raspberry Pi.
The KR Sense 45A is a small voltage and current sense breakout board.
Thanks to the SparkFun gator:soil micro:bit Accessory Board, you can now measure the moisture level in soil without any vocal…
This IR proximity contactless button makes for a good replacement for typical push buttons
This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now inst…
Deploy computer vision at the edge faster than ever, with our ready-to-use, standalone intelligent camera.
These digital (LH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun …
The Raspberry Pi Global Shutter Camera is a specialized 1.6-megapixel camera from Raspberry Pi that is able to capture rapid…
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi …
The KR Sense 90A is a small voltage and current sense breakout board.
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.
This is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board …
Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor.
Sharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a pho…
An ambient light sensor with peak sensitivity at 570 nm.
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring …
The 6-Channel Temperature Monitor can measure temperatures from as low as −240°C up to +850°C (real-world limits greatly …
The SparkFun RP2040 mikroBUS™ Starter Kit is designed to give you just what you need to start using the Click, Qwiic, and R…
Great for detecting motion in a small area and optimized for small movements to offer motion-sensing options for battery powe…
This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal.…
The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa…
This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12.
The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions.
This is the 8mm M-12 mount standard lens for use with the Raspberry Pi HQ Camera Module M-12.
Our RedBoards are great. But don't they sometimes seem a little **_BIG_**?! Enter **smôl**, a new range of boards which a…